MicroBubbler | High-Flow Micro Bubble Injector

The Multi-Venturi MicroBubbler is the latest innovation for injecting atmospheric air, pure oxygen and ozone. It can be applied to wastewater treatment, water treatment, hydroponics, agriculture, fish farming, irrigation and beyond.

This patented technology revolutionizes the way micro bubbles are created from a venturi. Fill your tank or reservoir with millions of micro bubbles using a plurality of small venturis. It can inject with extremely efficient flow rates of down to .01 L/min or as high as 12-18 L/min depending on pump flow and pressure. Must use the included flow valve to create smaller microbubbles or a flow meter. can produce bubbles as small as .1mm in diameter.

Material: Manufactured in Glass Reinforced Polypropylene. (Heavy Duty SCH 80)

• You will need:  a 3/16" air hose
  
• Included: An air hose flow valve (to control bubble size) and back flow check valve.
• Pump Requirements:
• 1.5" minimum pump flow rate of 16,000 L/H ( 4,200G/H )
•  2" minimum pump flow rate of 20,000 L/H ( 5,200G/H )
• If injecting fertilizers: run clean water through air inlet  to clean it out afterward
  
• Material:  Glass Reinforced sch 80 PVC
• Use it as a jet head nozzle in a tank. It creates a lot of back pressure and lowers outflow pressure. This  will greatly reduce the pump H/max if you don't use it as a jet head on the end of your piping into a tank. Or use as close as possible to the tank when used as a tee outside of a tank.
  
• Energy Efficient: No bulky machinery or air compressors needed like with other products. All you need is pressurized water or liquid.
  
• Multiple 5mm Venturis: Made with a plurality of many smaller venturis.  We strongly recommend a pre-filter if your water source contains lots of debris/particulates larger than 2-3mm so it doesn't clog